Assembler (2nd shift)

The work associated with this job includes but is not limited to the following:

• Assembling pad-mount gear enclosures ranging in size from 42" x 37" x 70" to 86" x 94" x 76".
• Identifying, transporting, installing, mounting and bolting all types of components ranging from 5 lbs. to 100 lbs. (with assistance), These include bus assemblies, high voltage switches, mounting and support plates, lock assemblies, doors and roofs.
• Performing mechanical inspection using torque wrenches, screwdrivers and tape measures.
• Using of simple material handling equipment, hand tools, power tools, air-impact tools, gauges and overhead cranes.
• Assembling pad mounted gear requires a fast-paced environment and the use of standardized work instructions. This assembly operation does index per a specified Takt Time.

To select this job as one of interest to you, at a minimum, you must have the following:

• Ability to follow standard work including specific written instructions and procedures.
• Ability to perform basic subassemblies
• Ability to use air-impact tools and other hand-held tools.
• Ability to use basic math such as adding and subtracting.
• Mechanical aptitude with the ability to learn mechanical assembly
• Assembly experience preferred.

. MAJOR PHYSICAL DEMANDS

• Standing: Most tasks are performed in a standing position with intermittent walking.
• Lifting: Frequent lifting of items ranging in weight from 5 lbs. to 50 lbs.
• Walking: Occasional walking moderate distances (less than 1/8 mile).
• Carrying: Frequent carrying of items ranging in weight from 5 lbs. to 25 lbs.
• Pushing: Occasional use of powered hand truck to move parts a moderate distance.
• Pulling: Occasional use of powered hand truck to move parts a moderate distance.
• Bending: Frequent bending and crouching required to complete the assembly tasks.
• Reaching: Continuous full range of motion from above the shoulders to below the knees.
• Handling: Continuous handling of parts ranging in size from 5 lbs. to 25 lbs.